特長
● Narrow Linewidth < 2MHz
● Excellent wavelength control and stability
● Industry Standard 14 pin Butterfly package
● Mode-Hop free tuning
● Excellant reliability
● Customer specific wavelengths available
レーザー仕様
Electrical/Optical Characteristics(Tsub=25°C, CW bias unless stated otherwise)
Parameter | Symbol | Min | Typ | Max | Unit |
Centre Wavelength | λ | 1900.5 | 1901 | 1901.5 | nm |
Side Mode Suppression Ratio | SMSR | 30 | 40 |
| dB |
Threshold Current | Ith |
| 20 | 30 | mA |
Operating Current | Iop |
| 100 | 120 | mA |
Chip output Power | Pf | 1 | 2 | 3 | mW |
Quantum Efficiency | η | 0.08 | 0.12 |
| mW/mA |
Current Tuning Coefficient | ∆λ/∆I |
| 0.015 |
| nm/mA |
Temperature Tuning Coefficient | ∆λ/∆T |
| 0.12 |
| nm/K |
Forward Voltage | Vf |
| 1.3 | 2 | V |
Thermistor Resistance | RT | 9.5 | 10 | 10.5 | KΩ |
Thermistor Temp. Coefficient |
|
| -4.4 |
| %/°C |
Connector | FC/APC |
Spectrum
Tuning Characteristics
DFB Linewidth Testing Result
L-I Curve
Beam Quality
2D
3D
Camera Analysis
パッケージサイズ
ピン定義
![GUGGDL(4GHO1@%_{H_OZB]I.jpg](./Uploads/Editor/Picture/2021-12-01/61a70c83b7b2b.jpg "GUGGDL(4GHO1@%_{H_OZB]I.jpg")
Pin Connection
PIN# | Function | PIN# | Function |
1 | Thermistor | 8 | Case Ground
|
2 | Thermistor | 9 | Case Ground |
3 | Laser Cathode (-) | 10 | NC |
4 | NC | 11 | Laser Anode (+) |
5 | NC | 12 | Laser Cathode (-) |
6 | TEC (+) | 13 | Laser Anode (+) |
7 | TEC (-) | 14 | NC |
Absolute Maximum Ratings
Item | Unit | Min | Typ | Max |
Case Temperature | ℃ | -5 | 25 | 70 |
Chip Temperature | ℃ | +10 | 25 | 40 |
Operating Current | mA | 0 | 100 | 120 |
Forward Voltage | V | 0.8 | 1.2 | 1.8 |
TEC Current | A | - | - | 1.2 |
Reverse Voltage（LD） | V | - | - | 2.0 |
Reverse Voltage(PD) | V | - | - | 20 |
応用 / 用途
● Tunable diode laser absorption spectroscopy
● Gas Monitoring
注文情報
PL-DFB-□□□□-☆-A8▽-XX
□□□□：Wavelength
1512:1512nm
*****
1653.7: 1653.7nm
1901: 1901nm
☆ ：Output Power
A：2mW
B：5mW
▽：Wavelength Tolerance
1：±1nm
2：±2nm
XX: Fiber and Connector Type
SA=SMF-28E+ FC/APC
SP=SMF-28E+ FC/PC
PP=PM Fiber+ FC/PC
PA=PM Fiber+ FC/APC
