電気・光学特性（E/O特性）
Electrical/Optical Characteristics (Tsub=25°C, CW bias unless stated otherwise)
Parameters | Sym. | Test conditions | Min | Typ | Max | Unit |
Response Spectrum | λ | - |
|
|
| nm |
Active diameter | φ | 100 |
|
|
| um |
Responsivity | Re | Pin=10μw,λ=2.20μm,VR=5V | 8.5 | 40 | 40 | A/W |
Max linear power | Φs | VR=5V,λ=2.20μm | 5 | 100 | 100 | mw |
Reverse breakdown voltage | VBR | D=100mA，φe=0 | 45 |
|
| V |
Optical return loss | Vpt | λ=2.20μm,φe=100μw | 30 |
|
| dB |
Optical insert loss | IRL | λ=2.20μm,φe=100μw |
|
| 0.5 | dB |
Dark current | ID | VR=5V,Pin=0μw |
| 0.5 | 1 | nA |
Capacitance3 | C | VR=5V,f=1MHz | 0.5 | 1.5 | 1.5 | PF |
-3dB bandwidth | BW | VR=5V,f0=100MHz,RL=50C | 0.6 | 1.5 | 1.5 | GHZ |
Operating voltage temperature coefficient | δ | Tc=-40～+85℃ |
| 0.10 | 0.15 | V/℃ |
Recommend Operating Voltage | VR | - | 5 | 5 | 5 | V |
Response Curve
Relative Responsivity(X100%)
（Wavelength Unit:nm）
Spectral response
Application electric circuit
注文情報
PL-□□□□-☆-AR▽-XX
□□□□: Cut off Wavelength
400: 400nm
900: 900nm
1700: 1700nm
2100: 2100nm
2400: 2400nm
2700: 2700nm
☆ ：Material
IG: InGaAs PD
Si: Si
▽: Active Area
45: 45um
60: 60um
75: 75um
….
100: 100um
XX: Package/Fiber and Connector Type
TO: TO46 Package
FSA=SMF-28E Fiber coupled+ FC/APC
FSP=SMF-28E Fiber coupled + FC/PC
FPP=PM Fiber Fiber coupled + FC/PC
FPA=PM Fiber Fiber coupled + FC/APC
User Safety
Safety and Operating Considerations
This device operates under reverse bias voltage, and the polarity of the device can’t be reversed.
Operating the Photodiode outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with this component cannot exceed maximum peak optical power.
ESD PROTECTION—Electrostatic discharge (ESD) is the primary cause of unexpected laser diode failure. Take extreme precaution to prevent ESD. Use wrist straps, grounded work surfaces, and rigorous antistatic techniques when handling Photodiodes.
