仕様
Parameter | Picosecond | Nanosecond |
Wavelength* | 395–1550 nm |
Spectrum width* | <10 nm |
Pulse repetition rate | Up to 30 MHz | Up to 10 MHz |
Laser triggering | TTL |
Optical pulse width* | < 150 ps | Tunable 1–100 ns |
Minimal peak power | 50–2000 mW | 100–2000mW |
Output type | FS/Fiber |
* Depending on laser diode
Picosecond Laser Diode Modules
PN# | Wavelength1,nm | Bandwidth, nm | Pulse duration, ps | Min peak power2, mW | Pulse repetition rate3, MHz | Output type4 |
Fabry-Perot LD |
LPM-PS-395 | 395±5 | <1 | <100 | 300 | 30 | FS/Fiber |
LPM-PS-405 | 405±5 | <1 |
| 300 |
|
|
LPM-PS-450 | 450±10 | <2 |
| 180 |
|
|
LPM-PS-520 | 520±10 |
|
| 100 |
|
|
LPM-PS-635 | 635±5 |
|
| 200 |
|
|
LPM-PS-780 | 785±5 | <1 | <120 | 350 |
|
|
LPM-PS-940 | 940±5 |
| <150 | 400 |
|
|
LPM-PS-976 | 976±1 |
| <100 | 600 |
|
|
LPM-PS-1064 | 1064±10 | <5 | <150 | 2000 |
|
|
LPM-PS-1550 | 1550±20 | <10 | <150 | 600 |
|
|
Single frequency LD |
LPM-PS-1030S | 1030±2*5 | <0.1 | <50 | 100 | 30 | Fiber |
LPM-PS-1064S | 1064±2 | <50 | 100 |
|
|
LPM-PS-1064SH | 1064±2 | <150 | 500 |
|
|
LPM-PS-1550S | 1550±2 | <30 | 50 |
|
|
1. Any wavelength between 1018-1700nm is optional.
2. Minimal peak power guaranteed for reliable and safe diode operation. Higher peak power could be reached at a customer risk
3. Pulse repetition rate is for built-in pulse generator. Pulse repetition rate set by an external pulse generator via TTL sync input is up to 60 MHz
4. The optical performance is shown for Free Space (FS) output in case of both FS and fiber output options are available.The modules with free space output could be supplied with detachable fiber pigtail with corresponding optical performance reduction to about 25% out of the free space performance level
応用 / 用途
• Time-Resolved Photoluminescence
• Confocal Laser Scanning Microscopy
• Fluorescence/Phosphorescence Lifetime imaging Microscopy
