電気・光学特性（E/O特性）
Condition:TO P = 20°C, IO P = 2.0 mA unless otherwise stated (TO P = chip backside temperature, controlled by the TEC)
T = 20°C unless otherwise stated
Parameter | Symbol | Units | Min | Typ | Max | Test conditions |
Emission wavelength | λR | nm | 830 |
| 870 | POP = 2 mW |
Threshold current | ITH | mA |
|
| 2 |
|
Laser current | IOP | mA |
|
| 6 | Popt. = 2 mW |
Laser voltage | UOP | V |
|
| 2.6 | Popt. = 2 mW |
Slope efficiency | ηS | W/A | 0.5 |
| 1 |
|
Output power | Popt | mW | 2 | 2.5 |
| IOP = 6 mA |
Differential series resistance | RS | Ω | 50 |
| 200 | Popt. = 2 mW |
Beam divergence | Θ | ° | 10 |
| 20 | Popt. = 2 mW, full width 1/e² |
Side mode suppression ratio | SMSR | dB | 10 |
|
| Popt. = 2 mW |
ESD damage threshold |
| V | 2000* |
|
| human body model |
Wavelength tuning over temperature |
| nm/K |
| 0.06 |
|
|
*for TO package with integrated Z-diode
Spectrum
L-I Curve(T@25°C)
注文情報
PL-VCSEL- □□□□-☆-▽- XX
□□□□：Wavelength
0760:760nm
0795:794.7nm
0850:850nm
*****
1653.7：1653.7nm
☆ ：TEC
0：Without TEC
1：With TEC
▽：Wavelength Tolerance
1：±0.5nm
2：±10nm
XX: Package
TO46
User Safety
Safety and Operating Considerations
This device operates under reverse bias voltage, and the polarity of the device can’t be reversed.
Operating the Photodiode outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with this component cannot exceed maximum peak optical power.
ESD PROTECTION—Electrostatic discharge (ESD) is the primary cause of unexpected laser diode failure. Take extreme precaution to prevent ESD. Use wrist straps, grounded work surfaces, and rigorous antistatic techniques when handling Photodiodes.
