特長
● High Power Stability
● Low Insertion Loss
● High Isolation
● High Extinction Ratio
光学特性
Tsub=25°C, CW bias unless stated otherwise
Parameters | Unit | Values |
Center Wavelength (λc) | nm | 675 or Specify |
Operating Wavelength Range | nm | ±5 |
Typ. Peak Isolation | dB | 30 |
Min. Isolation at 23℃ | dB | 25 |
Typ. Insertion Loss at 23℃ | dB | 1.1 |
Max. Insertion Loss at 23℃ | dB | 1.5 |
Min. Return Loss (Input/Output) | dB | 50/50 |
Min. Extinction Ratio | dB | 18 (only for B-Type), 20 (only for F-Type) |
Polarization Dependent Loss | dB | Max. 0.1 5(only for B-Type), Min. 20 (only for F-Type) |
Max. Average Power @ Proper SOP | W | 0.3 or Specify |
Max. Tensile Load | N | 5 |
Operating Temperature | ℃ | -0 to +70 |
Storage Temperature | ℃ | -20 to+85 |
Note:
* Above specifications are for device without connector.
* For devices with connectors, IL will be 1dB higher, RL will be 5dB lower,ER will be 2dB lower & handling power will be only 1W(CW)
* The PM fiber and connector key are aligned to the slow axis.
* The material must be RoHS compliant.
Testing Result with LD-PD 675nm Laser diode(675nm 4.7mw Narrow Linewidth Laser diode)：
Forward
Backward
パッケージサイズ
応用 / 用途
● Femto-second Fiber laser application
● Dense wavelength division multiplexing (DWDM)
● EDFAs for small package designs
● High power Fiber laser
注文情報
PL- HPMI-①①-②②②-③③-④-⑤⑤-⑥⑥-⑦-⑧⑧ (HPMI:MIR High power Version Isolator)
①①: Wavelength
67 - 675nm
SS - Specify
②②: Package Type
C40 - Type C40
③③: Handling Power
0.3 - 0.3W
④: Axis Alignment
B - Both Axis Working
F - Fast Axis Blocked
⑤⑤: Connector Type on Port 1 & 2 1A - FC/UPC
2A - FC/APC(Step)
3A - SC/UPC
4A - SC/APC(Step)
5A - FC/APC(Cone)
N - None S - Specify
⑥⑥: Fiber Jacket on Port 1 & 2
B - Bare Fiber
C - 900um Loose Tube(Red)
S - Specify
⑦: Fiber Length
0.6 - 0.6m
S - Specify
⑧⑧: Fiber Type
88 - PM 630-HP Fiber
S - Specify
Labeling
Laser Components Safety
Due to the small size of the Fiber optic module, the box packaging is labeled with the laser radiation hazard symbol and safety warning labels shown below:
User Safety
Safety and Operating Considerations
The laser light emitted from this laser diode is invisible and may be harmful to the human eye. Avoid looking directly into the fiber when the device is in operation.
CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT INCREASES EYE HAZARD.
Operating the laser Components outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with this component cannot exceed maximum peak optical power.
